Recycling Oil Use: One component Hot in place recycling Cold in place recycling Asphalt Pugmill mixing Available in two base oil and two emulsion grades Extremely stable with long shelf life Excellent fluxing and co-mingling with the binder Cyclogen® recycling oils restore select maltenes which have oxidized from the asphalt binder to re-balance the chemical composition of the aged asphalt binder. Offering benefits similar to Tricor engineered Reclamite® Rejuvenating Oil for fog seal surface treatment application, Cyclogen® increases penetration values / decreases micro viscosity, rebalancing the Asphalt components described below: Components of Asphalt Asphalt can be separated into five groups of components, which have great chemical similarity and behave alike. These groups are: A = Asphaltenes (A) are solid and have the appearance of coarse graphite powder, black or dark brown in color. PC = Polar Compounds (PC), First Acidiffins A1 = First Acidiffins (A1), Second Acidiffins A2 = Second Acidiffins (A2) and Saturates S = Saturates (S) are called “Maltenes” and have the consistency and appearance of heavy liquids. Asphaltenes are soluble only in the presence of Polar Compounds. The First and Second Acidiffins act as a medium to disperse the dissolved Asphaltenes, and the Saturates develop the setting characteristics of the entire solution. The ratio of PC/S must be 0.5 or greater to assure these components will not separate. The ratio of (PC+A1) / (S+A2) should be between 0.2 and 1.2 to assure good aging properties. This creates the chemical composition of Cyclogen®. The benefits of recycling asphalt include: rejuvenating a renewable resource, which has already been paid for by the agency and decreasing landfill disposal. In the hot in place recycling process, Cyclogen assists in decreasing the use of new mix and depletion of aggregate sources while increasing the cost effectiveness in remote or confined geographic areas. Cyclogen®….a proven product for recycling asphalt.